Zephyros 2 XL Tent Pitching Instructions

The Zephyros 2 XL is a lightweight spacious two-person tent using a proven, award-winning design. Perfect for weight-conscious backpackers that want a little bit more room than the standard Zephyros 2 tent. Read the Zephyros 2 XL tent pitching instructions below:

1. Unpack tent and lay out flysheet and inner (the inner tent is already attached to the inside of the flysheet).
2. Carefully assemble the alloy pole. Ensure all the joints are fully connected.
3. Slide pole through flysheet pole sleeve, shown as the dotted line on the diagram above.
4. Insert each pole-end into the corresponding eyelet tab on the hem of the flysheet, tabs are located at points A and B on diagram above.
5. Peg out: in the following order:
   i) tape attached to each end of the inner
   ii) guy rope at each end of the flysheet (the fibre poles should slope out slightly at the top)
   iii) remaining inner and flysheet tapes and elastics

The Zephyros 2 XL is supplied with the following:

• 1 x blue alloy pole
• 2 x red alloy poles
• 14 x ‘v’ alloy angle pegs

The Zephyros 2 XL is no longer available, we recommend the Zephyros Compact 2.